Huntsville Flight Center

1. Be at least 18 years of age;
2. Be able to read, speak, write, and understand the English language. If the applicant is unable to meet one of these requirements due to medical reasons, then the Administrator may place such operating limitations on that applicant's pilot certificate as are necessary for the safe operation of the aircraft.
3. Receive a logbook endorsement from an authorized instructor who:
   • Conducted the required ground training or reviewed the person's home study on the aeronautical knowledge areas listed in §61.125 of this part that apply to the aircraft category and class rating sought; and
   • Certified that the person is prepared for the required knowledge test that applies to the aircraft category and class rating sought.
4. Pass the required knowledge test on the aeronautical knowledge areas listed in §61.125 of this part;
5. Receive the required training and a logbook endorsement from an authorized instructor who:
   • Conducted the training on the areas of operation listed in §61.127(b) of this part that apply to the aircraft category and class rating sought; and
   • Certified that the person is prepared for the required practical test.
6. Meet the aeronautical experience requirements of this subpart that apply to the aircraft category and class rating sought before applying for the practical test;
7. Pass the required practical test on the areas of operation listed in §61.127(b) of this part that apply to the aircraft category and class rating sought;
8. Hold at least a private pilot certificate issued under this part or meet the requirements of §61.73; and
9. Comply with the sections of this part that apply to the aircraft category and class rating sought.

1. General: A person who applies for a commercial pilot certificate must receive and log ground training from an authorized instructor, or complete a home-study course, on the aeronautical knowledge areas of paragraph (b) of this section that apply to the aircraft category and class rating sought.
2. Aeronautical knowledge areas:
   • Applicable Federal Aviation Regulations of this chapter that relate to commercial pilot privileges, limitations, and flight operations;
   • Accident reporting requirements of the National Transportation Safety Board;
   • Basic aerodynamics and the principles of flight;
   • Meteorology to include recognition of critical weather situations, windshear recognition and avoidance, and the use of aeronautical weather reports and forecasts;
   • Safe and efficient operation of aircraft;
   • Weight and balance computations;
   • Use of performance charts;
   • Significance and effects of exceeding aircraft performance limitations;
   • Use of aeronautical charts and a magnetic compass for pilotage and dead reckoning;
   • Use of air navigation facilities;
   • Aeronautical decision making and judgment;
   • Principles and functions of aircraft systems;
   • Maneuvers, procedures, and emergency operations appropriate to the aircraft;
   • Night and high-altitude operations;
   • Procedures for operating within the National Airspace System; and
   • Procedures for flight and ground training for lighter-than-air ratings.

1. General: A person who applies for a commercial pilot certificate must receive and log ground and flight training from an authorized instructor on the areas of operation of this section that apply to the aircraft category and class rating sought.
2. Areas of operation:
   • For an airplane category rating with a single-engine class rating:
     • Preflight preparation;
     • Preflight procedures;
     • Airport and seaplane base operations;
     • Takeoffs, landings, and go-arounds;
     • Performance maneuvers;
     • Ground reference maneuvers;
     • Navigation;
     • Slow flight and stalls;
     • Emergency operations;
     • High-altitude operations; and
     • Postflight procedures.
     • For an airplane category rating with a multiengine class rating:
     • Preflight preparation;
     • Preflight procedures;
     • Airport and seaplane base operations;
     • Takeoffs, landings, and go-arounds;
     • Performance maneuvers;
     • Navigation;
     • Slow flight and stalls;
     • Emergency operations;
     • Multiengine operations;
     • High-altitude operations; and
     • Postflight procedures.

1. For an airplane single-engine rating: Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and single-engine class rating must log at least 250 hours of flight time as a pilot that consists of at least:
   • 100 hours in powered aircraft, of which 50 hours must be in airplanes.
   • 100 hours of pilot-in-command flight time, which includes at least --
     • 50 hours in airplanes; and
     • 50 hours in cross-country flight of which at least 10 hours must be in airplanes.
   • 20 hours of training on the areas of operation listed in §61.127(b)(1) of this part that includes at least --
     • 10 hours of instrument training of which at least 5 hours must be in a single-engine airplane;
     • 10 hours of training in an airplane that has a retractable landing gear, flaps, and a controllable pitch propeller, or is turbine-powered, or for an applicant seeking a single-engine seaplane rating, 10 hours of training in a seaplane that has flaps and a controllable pitch propeller;
     • One cross-country flight of at least 2 hours in a single-engine airplane in day VFR conditions, consisting of a total straight-line distance of more than 100 nautical miles from the original point of departure;
     • One cross-country flight of at least 2 hours in a single-engine airplane in night VFR conditions, consisting of a total straight-line distance of more than 100 nautical miles from the original point of departure; and
     • 3 hours in a single-engine airplane in preparation for the practical test within the 60-day period preceding the date of the test.
   • 10 hours of solo flight in a single-engine airplane on the areas of operation listed in §61.127(b)(1) of this part, which includes at least --
     • One cross-country flight of not less than 300 nautical miles total distance, with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and
     • 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight in the traffic pattern) at an airport with an operating control tower.
2. For an airplane multiengine rating: Except as provided in paragraph (i) of this section, a person who applies for a commercial pilot certificate with an airplane category and multiengine class rating must log at least 250 hours of flight time as a pilot that consists of at least:
   • 100 hours in powered aircraft, of which 50 hours must be in airplanes.
   • 100 hours of pilot-in-command flight time, which includes at least --
     • 50 hours in airplanes; and
     • 50 hours in cross-country flight of which at least 10 hours must be in airplanes.
   • 20 hours of training on the areas of operation listed in §61.127(b)(2) of this part that includes at least --
     • 10 hours of instrument training of which at least 5 hours must be in a multiengine airplane;
     • 10 hours of training in a multiengine airplane that has a retractable landing gear, flaps, and controllable pitch propellers, or is turbine-powered, or for an applicant seeking a multiengine seaplane rating, 10 hours of training in a multiengine seaplane that has flaps and a controllable pitch propeller;
     • One cross-country flight of at least 2 hours in a multiengine airplane in day VFR conditions, consisting of a total straight-line distance of more than 100 nautical miles from the original point of departure;
     • One cross-country flight of at least 2 hours in a multiengine airplane in night VFR conditions, consisting of a total straight-line distance of more than 100 nautical miles from the original point of departure; and
     • 3 hours in a multiengine airplane in preparation for the practical test within the 60-day period preceding the date of the test.
   • 10 hours of solo flight time in a multiengine airplane or 10 hours of flight time performing the duties of pilot in command in a multiengine airplane with an authorized instructor (either of which may be credited towards the flight time requirement in paragraph (b)(2) of this section), on the areas of operation listed in §61.127(b)(2) of this part that includes at least --
     • One cross-country flight of not less than 300 nautical miles total distance with landings at a minimum of three points, one of which is a straight-line distance of at least 250 nautical miles from the original departure point. However, if this requirement is being met in Hawaii, the longest segment need only have a straight-line distance of at least 150 nautical miles; and
     • 5 hours in night VFR conditions with 10 takeoffs and 10 landings (with each landing involving a flight with a traffic pattern) at an airport with an operating control tower.

Overview